Yeti Cycles 575 Owner's Manual download pdf (Page 14)

Disassembly Tips

DISASSEMBLY

FRAME DISASSEMBLY To remove the main pivot pin, place a 5mm

allen key on the button head bolt and a 6mm allen key on the main

pivot pin. Turn counter-clockwise until the button head is removed. Then

take 8mm allen key or a punch and tap out the main pivot pin with a dead

blow hamemr.

Note: Disassemble this ﬁrst so that the seatstays don’t hit the frame when

hammernig out the main pivot pin.

FRAME DISASSEMBLY

Now remove the male and female Yeti bolts

that attach the seatstays to the shock and dogbone. You will need two

5mm allen keys in order to back off these bolts. Your swing arm should now

be free to slide off the front triangle.

FRAME DISASSEMBLY

To remove the shock mounting bolts, place a

5mm allen key on both ends of the bolts and turn counter-clockwise.

Once the male Yeti bolt is removed, take a 6mm allen key and tap out the

female end.

Note: This methods works for all three mounting bolts on a Fox Racing

Shock.

FRAME DISASSEMBLY

Use a 2.5mm allen key to loosen the socket

head cap screws from the dogbone.

FRAME DISASSEMBLY Slide a washer and removal slug onto the

threaded bolt. Slide this subassembly through the shock and dogbone.

On the opposite end, slide on the catch sleeve, washer and then thread the

nut on.

Use two 1/2’’ and adjustable wrenches and torque down until the removal

slug presses the steel pin out of the dogbone bearing assembly.

1 2 ... 9 10 11 12 13 14 15 16 17

No comments

Yeti Cycles 575 Owner's Manual Page 14