Yeti Cycles 575 User Manual download pdf (Page 13)

Disassembly Tips

DISASSEMBLY

CHANGES We strive to make the best bikes in the world,

because of this dedication to be the best, we continually make

changes to our bikes as needed. As the bikes are improved,

assembly and setup instructions may be affected. Any

amendments to the existing Owners Manual can be found on

our website. www.yeticycles.com

LINKAGE DISASSEMBLY Slide a washer on the threaded bolt then

slide this through the removal slug (1.5” long). Slide the tool assembly

through the Dogbone, shock connection point. On the opposing side slide

on the catch sleeve and washer, then thread the nut on.

LINKAGE DISASSEMBLY

Place the wrenches on the tool assembly

and turn to press the pin out.

FRAME DISASSEMBLY To remove the main pivot pin, place a 5mm

allen key on the button head bolt and a 6mm allen key on the pivot

pin. Turn counter-clockwise until the button head is removed. Then take an

8mm allen key and tap out the main pivot pin.

FRAME DISASSEMBLY

To remove the shock mounting bolt, place on

5mm allen key on both end of the bolt and turn counter-clockwise.

One the male Yeti bolt is removed, take a 6mm allen key and tap out the

female end.

Note:

this method works for all three mounting bolt s on a Fox Racing

shock. For a 5th element see the speciﬁed section on the following page.

FRAME DISASSEMBLY First, take the two 5mm allen keys and loosen

one of the male Yeti bolts. Remove the loosened Yeti bolt and set aside

for reassembly.

FRAME DISASSEMBLY

Slide a 4mm allen key inside of the threaded

steel pin and feel for the 4mm hex in the middle of the pin. Take the

5mm allen key and turn counterclockwise against the 4mm allen key to

break the assembly free. All the pieces to the seatstay pivot should now be

loose and slide apart.

5TH ELEMENT DISASSEMBLY NOTE The seatstay pivot has a unique disassembly technique. The

system is made up of a steel female pin threaded on both side with a 4mm broach in the middle. Attached to

this pin is two male Yeti bolts. Follow the instructions below to disassemble this pivot point. Also note there

is a diagram of the steel pin below to aid in disassembly.

4mm broach

Threaded Ends

STEEL PIN DIAGRAM

1 2 ... 8 9 10 11 12 13 14 15 16 17

Comments to this Manuals

No comments

Yeti Cycles 575 User Manual Page 13

Comments to this Manuals

Related products and manuals for Bicycles Yeti Cycles 575